Lead-Free Dual Wave Soldering Machine SE-450-PLUS

Features

1.Closed loop with inverter control system to keep the stability and accuracy of the conveyor speed;

2.The assistant pressure device nearby the entrance to prevent the PCB from slipping;

3.Spray nozzle driving by stepping motor is to make sure the coating uniformly;

4.Module design of spray fluxer system and the design of nozzle always be perpendicular to rail,which can make sure the flux penetrates PCB easily;

5. Forced air cooling system to attain the cold-down slope as per lead-free required;

6.Conveyor angle can easily be adjusted by manual;

7.Standard with hot air heating for preheating zones;

8.Module design suitable for SMT&THT component soldering;

9.Exhaust adopt centrifuagal fan with double filters to avoid any fluc drop to PCB;

10.The level of flux container is controlled by non-contact sensors to ensure no corrision and longer life;

11.Flux spray nozzle with self-cleaning system;

12.Stadard with air knives to prevent flux expand to preheat zone;

13.Wave height control adopted with inverter,it can be set individually;

14.1/4 HP high power mechanical pump to meet the wave as high as 15mm;

15.Light&Sound alarm,Emergency stop and over-load protection.

Specifications